|
|
|
|
 |
Cold milling | |||||||||||||||||||
 Our
dustless cold milling planer with its razor-sharp tungsten carbide cutters
powered at 500 rpm's is capable of grinding 3" off of 3,000 PSI concrete
in one pass! For those jobs requiring more precision the planer can be configured
to accurately remove from 1/16" to 3/4" of asphalt, concrete, epoxies...you
name it. Our planer is ideal for traffic line removal as well as for milling,
grooving, and leveling for better drainage and safety. Call for our hourly
rate and a telephone estimate. Scroll to photos below... |
|
||||||||||||||||||||
| All
JSC technicians go through 60 hrs. of rigorous safety training per year.
|
|||||||||||||||||||||
|
|
.gif){kind=small} Call
us if you need a dustless set up! |
|||||||||||||||||||
For this stripe
removal job cutters removed the paint in a dustless set up. |
 ...and the results - ready for new striping. |
||||||||||||||||||||
 click
on photos to enlarge |
 |
 |
|||||||||||||||||||
 Jim supervises the milling. |
 |
||||||||||||||||||||
back
to top  |
|||||||||||||||||||||
 The "Jiminator".
|
 The milling "waste" is siphoned to 2 sealed drums located in truck. |
||||||||||||||||||||
 Cold milling concrete near the San Diego Convention Center. |
|||||||||||||||||||||
| back
to top
|
|||||||||||||||||||||
|
|||||||||||||||||||||
home
|
what
kind of job? :: residential
:: commercial
:: industrial
:: public works
:: | <
list of services
> |
satisfied
clients | contact
us  Jim Sander Company copyright © 2001 www.jimsandercompany.com/cold_milling.html Last updated 23 May 2002 |
|||||||||||||||||||||
(387-8688)
